The Grand 202 Interior Door is a great door for a bedroom, bathroom, or even an office because of its tempered glass. This lightweight door provides privacy while still allowing in a good amount of natural light, and the Grand 202 Interior Door in a wenge finish adds a vibrant personality to any room.
To create the Grand 202, pine wood slabs are pieced together and reinforced with medium-density fibreboard. Fibreboard is stronger than plywood while still allowing the door to be lightweight and easy to open. Tempered glass running the length of the door slab makes up the rest of the door.
As with all of our products, the Grand 202 Interior Door comes with a two year warranty. We're sure you'll appreciate both the look and the functionality of this excellent product, and don't forget to check out our great selection of handles and other items to complement your new door.
Flexible width door. Two solid pine wood planks, lined with MDF, covered in natural African Wenge veneer and mortised for glass inlay. Three layer Becker Acrona finish with interim grinding and polish. Semi flat with a little texture. Tempered glass, used for this door is very strong and safe. It can be cut to fit in case the rough opening is not of standard size.
Door Width: 23 13/16 inches
Hanging Options: Complete with Door Jambs, Casing, Door Handle Pre-drilling, and Chrome Plain Bearing Hinges
All doors are coated with natural wood veneer, which require no further treatment of the slab. We use only the finest materials and construction techniques available on the market, which makes our products quality and appearance absolutely superb.
Door "Slab" Orders
Slab door is just a rectangular slab of wood. No frame, casing or hardware are included (unless otherwise noted) and the door is NOT prepped for hinges or a handle.
This is a knocked down pre-hung door option that is easy to assemble and to install. Door slabs and Jambs are precisely pre-machined to match each other at the assemblage points. Jambs and Casings are carefully packed and shipped together with door slabs. Every piece is labeled to make assembly and installation quick and easy at the job site.
Pre-hanging preparation consists of the following:
Door Jamb and Casing
The frame is made from natural wood filling with a rubber sealed door stops, and self-regulating molding to enable easy installation. The thickness of the door jamb is 3 7/8”, which is adjustable to 4 7/8” using the L-Casing molding. Casings are applied around the door jamb, which are the same finish as the door.
A pre-hung unit will have pre-drilled door for a handle with 2 3/8” backset.
Bore diamteter will be 2 1/8”.
Backset is the distance from the edge of the door to the center of the bore hole.
All steel base material. Plain bearings. .Full mortise. Polished chrome finish. Size: 3.5” x 3.5” square hinge.
SOSS Invisible Hinges:
Fully concealed hinge. 3 hinges per door. Zinc bodies and steel links. Satin chrome finish.
More Info: www.soss.com