Decorplanet logo
(800) 504-9974
? Favorites

Myson B36-RB European Tradition 21 1/4" Wall Mount Hydronic Towel Warmer With Finish: Regal Brass

Product Code: B36-RB

About Myson B36-RB European Tradition 21 1/4" Wall Mount Hydronic Towel Warmer

The European Tradition Hydronic Towel Warmers are made of 1 1/4" brass tube and fittings in a variety of finishes. This towel warmer is constructed with integral 3 1/4" diameter wall mounting flanges that are welded onto the back The towel warmers are equipped with a manual air vent. Every unit is factory filled, tested and inspected to insure the finest quality product.
  • Solid brass construction
  • Wall mount installation
  • Center to Center: 18"
  • Dezincification resistant brass
  • 1 1/4" diameter brass tubing
  • 2 x internal thread G 1/2" BSP standard connection
  • Heat Output: 1344 BTUH @ 155 EWT
  • Weight: 29 Ibs
  • Maximum positive operating pressure: 77 PSI
  • Maximum operating temperature: 230° F
  • Suitable for central heating or hot water circulating systems
  • Valves and sleeve kit must be purchased separately

Key Features & Innovations

System (Direct)

Suitable for direct systems

System (Indirect)

2 pipe pumped indirect domestic and commercial heating applications with a maximum working temperature of 100°C

Air Vents


Dual Fuel

This allows a hydronic product to be used if the central heating system is not active. The pipe centres featured in this Myson's are based on hydronic products. When adding heater kits to multi-rails, a T-piece and element will be required that alters the pipe centre dimensions. The difference in pipe centres featured are based on using MYSON valves. These differences may vary on other manufacturers’ valves. For the most efficient operation, one valve should be open and one valve should be closed. Avoid closing both valves.

APM Technology

APM - Auto Power Management System represents the most advanced element technology available. It is an economical, self-regulating element. When it reaches the required temperature, it reduces power consumption accordingly. There is no need for a thermostat. The required temperature is achieved smoothly and stays constant. APM is now fitted to all PTC and MHK heating elements and most MYSON electric units where stated.

Opearting Pressures

Tested to a pressure of 6.9 bar. Working pressure of up to 5.3 bar


  • Manufactured and tested to BS EN 442. Carries the BS Kitemark. Produced under an environmental management system - ISO 14001:2004
  • CE approved

Configured as:
Finish: Regal Brass

This product has the following variations:

B36-CH With Finish: Chrome $3,028.50
B36-SN With Finish: Satin Nickel $3,391.50
B36-RB With Finish: Regal Brass $3,694.50
B36-NI With Finish: Polished Nickel $3,179.25
B36-WH With Finish: White $2,725.50
B36-ORB With Finish: Oil Rubbed Bronze $2,725.50
W 21 1/4" x H 51 1/4" x D 5 1/2"
Material Brass
Finish Chrome, Brass/Antique Brass, Distressed Bronze/Oil Rubbed Bronze, Satin Nickel, White, Polished Nickel
Style Traditional/Classic
Width 21 1/4 in
Height 51 1/4 in
Depth 5 1/2 in
Installation Type Wall Mount, Floor Mount
System Type Hydronic
Warranty 10 Year Limited Warranty
User Reviews

User Reviews

Remember me
Sort by:  Latest  |  Helpful
Questions & Answers

Questions & Answers

Have a question? Ask here.

To Top